Gnomer 3060 Ti (2025)

1. RTX 3060 Ti; Driver 550.54.14; Fedora Kinoite 39 6.7.6-200.fc39 ...

  • Mar 3, 2024 · I have an RTX 3060 Ti that works fine with the 545.29.06-3.fc39.x86_64 driver. The recent update allows me to upgrade to the 550.54.14 driver.

  • I have an RTX 3060 Ti that works fine with the 545.29.06-3.fc39.x86_64 driver. The recent update allows me to upgrade to the 550.54.14 driver. However, when doing so, the system will have no displays available and my three monitors shut off due to no signal. I left the system running for several hours but with no change. Since I use an atomic distribution, I was able to boot back into a working snapshot and look at the boot logs. In the boot logs I find that the Nvidia driver ran into a kernel o...

RTX 3060 Ti; Driver 550.54.14; Fedora Kinoite 39 6.7.6-200.fc39 ...

2. NVIDIA GeForce RTX 3060 Ti Linux Performance Exceeds ... - Phoronix

  • Dec 1, 2020 · The GeForce RTX 3060 Ti offers performance comparable or slightly faster than the GeForce RTX 2080 SUPER and especially much stronger performance for compute ...

  • NVIDIA tomorrow is launching the GeForce RTX 3060 Ti with their Founder's Edition card and AIB variants are also expected.

NVIDIA GeForce RTX 3060 Ti Linux Performance Exceeds ... - Phoronix

3. How can I make the 2nd GPU (RTX 3060 Ti) be usable by the host ...

  • Apr 9, 2023 · I have a 3060 Ti as secondary on Ubuntu, and I want it to be used by the host system for stuff that can only be done by an NVIDIA GPU without using it as ...

  • I have a 3060 Ti as secondary on Ubuntu, and I want it to be used by the host system for stuff that can only be done by an NVIDIA GPU without using it as display (disable it completely), such as CUDA (i.e. Stable Diffusion). However, I also want to be able to use that GPU for passthrough seamlessly to my VMs if needed, and be able to use it again for CUDA after I’m done using it for VM work. In short, I still need a display cable plugged into the GPU for the VMs, while still be able to use it ...

How can I make the 2nd GPU (RTX 3060 Ti) be usable by the host ...

4. View topic - dGPU with nvidia-drivers and Gnome Wayland

5. RTX 3060Ti with 535.x and 545.x causes flickering during video ...

  • Jan 30, 2024 · The flicker occurs both under Xfce and Gnome. Once the flickering starts can I logout and switch the window manager, and the flickering persists ...

  • Hello, I have been seeing this issue for a while now but also noticed several new driver releases addressing various flicker issues and have remained patient in the hope it might end up getting caught with similar fixes. The forum lists a few threads on flickering, but I could not find one that matches my situation. Hence am I creating this thread in the hope it catches some attention. The flicker starts only after a while (i.e. a minute of video playback) and is very weak. It then gradually i...

RTX 3060Ti with 535.x and 545.x causes flickering during video ...

6. Running The New Open-Source NVIDIA GeForce RTX 30 Series ...

  • Dec 20, 2022 · For this initial open-source GeForce RTX 30 series testing on Linux 6.2 I just used the RTX 3060 Ti for providing a first look at the Nouveau performance.

  • First up was trying out the GeForce RTX 30 series Nouveau support using the GeForce RTX 3060 Ti...

Running The New Open-Source NVIDIA GeForce RTX 30 Series ...

7. Can't get a RTX 3060 to work properly - Fedora Discussion

  • Aug 20, 2023 · I'm trying to get steam to work on my freshly installed desktop with RTX 3060. First, I followed this guide: How to Install Nvidia Drivers on Fedora | ...

  • Hi, I’m trying to get steam to work on my freshly installed desktop with RTX 3060. First, I followed this guide: How to Install Nvidia Drivers on Fedora | phoenixNAP KB installing the drivers using the official NVIDIA installer. I’ve managed to launch steam, but not any games. (After being unable to login to forums for some reason) I went to the Fedora Discord server where they recommended to use the RPM fusion guide here: Howto/NVIDIA - RPM Fusion I have followed that and now steam won’t eve...

Can't get a RTX 3060 to work properly - Fedora Discussion

8. Issues with Ubuntu 22.04LTS and Nvidia Graphics Card

  • Apr 22, 2023 · NVidia 3060ti graphics card. Currently, my Ubuntu 22.04 install (standard Gnome desktop) cannot detect my graphics card. It lists "llvmpipe ( ...

  • My Home rig has 6 OSs loaded, with the same hardware for all of them, so 'Hardware issues' can be ruled out. NVidia 3060ti graphics card. Currently, my Ubuntu 22.04 install (standard Gnome desktop)

Issues with Ubuntu 22.04LTS and Nvidia Graphics Card

9. Bit of a "Interesting" problem...RTX 3060 Ti crashing

  • Mar 22, 2022 · I'm running Gnome–no “funny” addons – So, I'm thinking that something changed in power control through an update in the recent past. I had prior ...

  • Well…I have a bit of a real head-scratching problem. I’ve posted on Gigabyte-Aorus reddit, Gridcoin reddit & Nvidia Linux developers forum… (WARNING!!! LONG POST) So, here it goes: First Post-- AORUS GeForce RTX 3060 Ti ELITE-------FAILED OK–a bummer of a post…got this card at the one time recently that NewEgg had them at MSRP (3/5/22). Got the card a couple of days later…worked perfectly for about 1 week & then started blank screening everytime I started anything that would clock-up memory (...

Bit of a

10. GNOME Magnifier and OBS Screen Capture with Pipewire

  • Mar 15, 2023 · GNOME 42 in Nobara 36; GNOME 43 in Nobara 37. (Nobara is based on Fedora.) Specs: CPU: Ryzen 9 5900X from AMD GPU: NVIDIA RTX 3060 Ti RAM ...

  • Desktop Environments Affected: GNOME 42 in Nobara 36 GNOME 43 in Nobara 37 (Nobara is based on Fedora.) Specs: CPU: Ryzen 9 5900X from AMD GPU: NVIDIA RTX 3060 Ti RAM: 32GB Resolution: 3840x2160 at 60Hz Timeline In March 12, 2023, I published the video regarding my issues with GNOME Magnifier both in Xorg and Wayland. Later that morning (March 12, 2023), I created an issue in Pipewire’s issue tracker. On March 14, 2023, I published another video but this time only on Wayland with Pi...

GNOME Magnifier and OBS Screen Capture with Pipewire

11. GNOME Wayland eGPU - Video accel? - Framework Laptop 13

  • 3 days ago · Specs: GNOME 47.2; 11th gen i5 (Iris Xe): Mesa 24.3.3; GTX 3060 Ti: nvidia-dkms 565.77; Kernel 6.12.8.

  • Hi all, The way that Mutter manages multiple GPUs on wayland is by selecting a primary GPU (which can be overridden with udev rules, which I have done), then putting other GPUs in copy mode and having the primary write frames to the others’ memory. This works well for desktop tasks, but I’m specifically trying to have videos on the internal monitor accelerated by the internal GPU. Has anyone managed this? Right now, with YouTube playing on the second monitor, intel_gpu_top shows that the secon...

GNOME Wayland eGPU - Video accel? - Framework Laptop 13

12. Fresh install: Gnome using X11 instead of Wayland / Newbie ...

  • Apr 1, 2024 · 0 NVIDIA GeForce RTX 3060 Ti Off | 00000000:26:00.0 On | N/A | | 0% 48C P8 14W / 200W | 545MiB / 8192MiB | 10% Default | | | | N/A | + ...

  • I just installed using `archinstall`. I have an Nvidia GPU and I selected the `"Nvidia (open kernel module for newer GPUs, Turing+)"` option.

13. Nouveau is very slow on RTX 3060 Ti - Launchpad Bugs

  • Mar 28, 2022 · For example the mouse pointer. ProblemType: Bug DistroRelease: Ubuntu 20.04. Package: gnome-shell 3.36.9-0ubuntu0.20.04.2 ProcVersionSignature: ...

  • When I login with Ubuntu on Wayland, everything goes extremely slow. For example the mouse pointer. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: gnome-shell 3.36.9-0ubuntu0.20.04.2 ProcVersionSignature: Ubuntu 5.13.0-37.42~20.04.1-generic 5.13.19 Uname: Linux 5.13.0-37-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.21 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Mon Mar 28 09:16:30 2022 DisplayManager: gdm3 InstallationDate: Installed on 2022-02...

Nouveau is very slow on RTX 3060 Ti - Launchpad Bugs
Gnomer 3060 Ti (2025)
Top Articles
Latest Posts
Recommended Articles
Article information

Author: Ray Christiansen

Last Updated:

Views: 5923

Rating: 4.9 / 5 (69 voted)

Reviews: 92% of readers found this page helpful

Author information

Name: Ray Christiansen

Birthday: 1998-05-04

Address: Apt. 814 34339 Sauer Islands, Hirtheville, GA 02446-8771

Phone: +337636892828

Job: Lead Hospitality Designer

Hobby: Urban exploration, Tai chi, Lockpicking, Fashion, Gunsmithing, Pottery, Geocaching

Introduction: My name is Ray Christiansen, I am a fair, good, cute, gentle, vast, glamorous, excited person who loves writing and wants to share my knowledge and understanding with you.